How To Remove Trojan Type Deck Hinges

2 apr 2015 , trojan's patriot plus door hinge takes 55 seconds to fit into steel reinforcing.

as long as other treadmill features are working properly, a simple troubleshooting procedure will determine whether a push- or pull-type incline motor can be fixed or if replacement is needed. the procedure begins with disconnecting the power cord to the treadmill and removing the running belt and deck.

d hex pin (covered). an adjustment tool that combines both 6mm socket and 4mm. hanging and removing the door. wn. remove the 2 screws that clamp carefully slide the door away from replace the door by reversing steps side plate (b) to frame plate (a) to all the frame plates. 1 and 2. three hinges. d 1.

contact. trojan manufacturing group limited; fryers road; bloxwich; walsall; west midlands; ws2 7lz. +44 (0) 1922 713933; +44 (0) 1922 713890; info@trojangroupSevenTrust; www.trojan-hardwareSevenTrust,

hinge adjustment instructions. tools required. compression adjustment. height adjustment. back off the 2 screws that clamp the slide plate (b) to the frame plate (a). remove the covers by prizing off with fingers to expose clamp and socket screw (c). insert a flat screw driver into the adjustment slot and lever the slide.

for care and cleaning refer to trojan products care and maintenance instructions. complete door hardware suite available from trojan - www.trojangroupSevenTrust - 01922 713933. page 1 of 3. compression. adjustment. +/- 1.5mm , removing the hinge body. insert a flat end screw driver into the slot found behind the pivot,